Intel S1200BT Service Manual Download Page 47

Page: 47 / 122

Intel® Server Board S1200BT Service Guide

Comments:Information only. Displays Brand ID string read from processor with CPUID

instruction.

7. Intel® Turbo Boost Technology

Option Values:Enabled

Disabled

Help Text:

Intel

Turbo Boost Technology allows the processor to automatically increase its

frequency if it is running below power, temperature, and current specifications.

Comments:This option is only visible if all processors installed in the system support

Intel

Turbo Boost Technology. In order for this option to be available, Enhanced Intel

SpeedStep

Technology must be Enabled.

8. Enhanced Intel

SpeedStep

Tech

Option Values:Enabled

Disabled

Help Text:

Enhanced Intel

SpeedStep

Technology allows the system to dynamically adjust

processor voltage and core frequency, which can result in decreased average power

consumption and decreased average heat production.

Contact your OS vendor regarding OS support of this feature.

Comments:When Disabled, the processor setting reverts to running at Max TDP Core

Frequency (rated frequency).

This option is only visible if all processors installed in the system support Enhanced

Intel

SpeedStep

Technology. In order for the Intel

Turbo Boost option to be available,

Enhanced Intel

SpeedStep

Technology must be Enabled.

9. Turbo Boost Performance/Watt Mode

Option Values:Power Optimized

Traditional

Help Text:

When Power Optimized is selected, Intel

Turbo Boost Technology engages after

performance state P0 is sustained for more than two seconds. When Traditional is

selected, Intel

Turbo Boost Technology is engaged even for P0 requests less than

two seconds.

Summary of Contents for S1200BT



























































































































Search results

Summary of Contents for S1200BT

Reviews:

Intel S1200BT, Service Manual, Page: 47 / 122

Search results

Summary of Contents for S1200BT

Reviews: