manualshive.com logo in svg

Intel S1200BT, Service Manual, Page: 62 / 122

Share
Download
Intel S1200BT Service Manual Download Page 62

46

Intel® Server Board S1200BT Service Guide

Security Screen (Tab)

The

 Security

 screen allows the user to enable and set the user and administrative 

password and to lock out the front panel buttons so they cannot be used. This screen also 

allows the user to enable and activate the Trusted Platform Module (TPM) security 

settings on those boards that support TPM.

To access this screen from the 

Main

 screen or other top-level 

Tab

 screen, press the right 

or left arrow keys to traverse the tabs at the top of the 

Setup

 screen until the 

Security

 

screen is selected.

Figure 18. Security Screen

1. Administrator Password Status

Option Values:Installed

Not Installed

Help Text:<None>

Comments:Information only. Indicates the status of the User Password.

2. User Password Status

Option Values:Installed

Not Installed

Help Text:<None>

Comments:Information only. Indicates the status of the User Password.

3. Set Administrator Password

Option Values: [Entry Field]

Summary of Contents for S1200BT



























































































































Reviews:

No comments