Intel S1200BT Service Manual Download Page 7

Page: 7 / 122

Intel

Server Board S1200BT Service Guide

vii

Preface

About this Manual

Thank you for purchasing and using the Intel

Server Board S1200BT.

This manual is written for system technicians who are responsible for troubleshooting,

upgrading, and repairing this server board. This document provides a brief overview of

the features of the board/chassis, a list of accessories or other components you may need,

troubleshooting information, and instructions on how to add and replace components on

the Title of document. For the latest version of this manual, see:

http://www.intel.com/

support/motherboards/server.

Manual Organization

Chapter 1 provides a brief overview of the Server Board S1200BTL and S1200BTS. In

this chapter, you will find a list of the server board features, photos of the product, and

product diagrams to help you identify components and their locations.

Chapter 2 provides instructions on using the utilities shipped with the board or that may be

required to update the system. This includes how to navigate through the BIOS Setup

screens, perform a BIOS update, and reset the password or CMOS. Information about the

specific BIOS settings and screens is available in the Technical Product Specification. See

"Additional Information and Software"

for a link to the Technical Product Specification.

Chapter 3 provides instructions on adding and replacing components. Use this chapter for

step-by-step instructions and diagrams for installing or replacing components such as the

memory, processor, control panel board, and battery, among other components.

Chapter 4 provides troubleshooting information. In this chapter, you will find BIOS error

messages and POST code messages. You will also find suggestions for performing

troubleshooting activities to identify the source of a problem.

Product Accessories

This server board is compatible with Intel

Server Chassis P4304XXSFCN and

P4304XXSHCN.

You may need or want to purchase one or more of the following accessory items for

your server.

Summary of Contents for S1200BT



























































































































Search results

Summary of Contents for S1200BT

Reviews:

Intel S1200BT, Service Manual, Page: 7 / 122

Search results

Summary of Contents for S1200BT

Reviews: