manualshive.com logo in svg

Intel S1200BT, Service Manual, Page: 57 / 122

Share
Download
Intel S1200BT Service Manual Download Page 57

Intel® Server Board S1200BT Service Guide

41

5. Configure AXX4SASMOD RAID Module

Option Values:

IT/IR

Intel

®

 ESRT2 (LSI(TM))

Help Text:

— IT/IR: Provides pass-through drive support as well as HW RAID 0/1/1e support. 

Uses LSI(TM) mpt drivers.

— Intel

®

 ESRT2 (Powered by LSI(TM)): Supports RAID 0/1/10 and optional 

RAID 5 with Intel

®

 Embedded Server RAID Technology 2 (ESRT2). Uses 

Intel

®

 ESRT2 drivers (based on LSI(TM) MegaSR).

Comments:This option setting only appears when an AXX4SASMOD Storage Module is 

installed. If a RAID Volume has not previously been created, it will be necessary to Save 

and Exit and reboot in order to create a RAID Volume.

6. SATA Port

Option Values:

Not Installed

<Drive Information>

Help Text:

(Ports 0-1): 6Gb SATA capable port

(ports 2-5): 3Gb SATA capable port 

Comments:Information only. This is repeated for all 6 SATA Port for the Onboard SATA 

Controller. This section for SATA Drive Information does not appear when the SATA 

Mode is RAID Mode.

Serial Port Configuration

The Serial Port Configuration screen allows the user to configure the Serial A [COM 1] 

and Serial B [COM2] ports.

Summary of Contents for S1200BT



























































































































Reviews:

No comments