Intel S1200BT Service Manual Download Page 48

Page: 48 / 122

Intel® Server Board S1200BT Service Guide

Comments:Turbo Boost Power Optimization is not available on all processors, and is

available only when Intel

Turbo Boost Technology and Enhanced Intel

SpeedStep

Technology are Enabled.

10. Processor C3

Option Values:Enabled

Disabled

Help Text:

Enable/Disable Processor C3 (ACPI C2/C3) report to OS

Comments:This is normally Disabled, but can be Enabled for improved performance on

certain benchmarks and in certain situations.

11. Processor C6

Option Values:Enabled

Disabled

Help Text:

Enable/Disable Processor C6 (ACPI C3) report to OS

Comments:This is normally Enabled but can be Disabled for improved performance on

certain benchmarks and in certain situations.

12. Intel

Hyper-Threading Tech

Option Values:Enabled

Disabled

Help Text:

Intel

Hyper-Threading Technology allows multithreaded software applications to

execute threads in parallel within each processor.

Contact your OS vendor regarding OS support of this feature.

Comments:This option is only visible if all processors installed in the system support

Intel

Hyper-Threading Technology.

13. Core Multi-Processing

Option Values:All

Help Text:

Summary of Contents for S1200BT



























































































































Search results

Summary of Contents for S1200BT

Reviews:

Intel S1200BT, Service Manual, Page: 48 / 122

Search results

Summary of Contents for S1200BT

Reviews: