Intel S1200BT Service Manual Download Page 52

Page: 52 / 122

Intel® Server Board S1200BT Service Guide

Option Values:Enabled

Disabled

Help Text:

When enabled, a SMX can utilize the addional hardware capabilities provided by Safer

Mode Extensions.

Comments:Intel (SMX) Safer Mode Extensions is set of CPU instructions used by Intel

TXT software.

Memory Configuration

The

Memory Configuration

screen allows the user to view details about the DDR3

DIMMs that are installed as system memory.

To access this screen from the

Main

screen, select

Advanced

Memory Configuratio

To move to another screen, press the <Esc> key to return to the

Advanced

screen, then

select the desired screen.

Figure 12. Memory Configuration Screen

Screen Field Descriptions:

1. Total Memory

Option Values:<Total Physical Memory Installed in System>

Help Text:<None>

Comments:Information only. Displays the amount of memory available in the system in

the form of installed DDR3 DIMMs, in units of GB.

Summary of Contents for S1200BT



























































































































Search results

Summary of Contents for S1200BT

Reviews:

Intel S1200BT, Service Manual, Page: 52 / 122

Search results

Summary of Contents for S1200BT

Reviews: