manualshive.com logo in svg

Intel S1200BT, Service Manual, Page: 43 / 122

Share
Download
Intel S1200BT Service Manual Download Page 43

Intel® Server Board S1200BT Service Guide

27

Figure 10. Advanced Screen

Screen Field Descriptions:

1. Processor Configuration

Option Values: <None>

Help Text: View/Configure processor information and settings.

Comments:Selection only. Position to this line and press the <Enter> key to go to the 

Processor Configuration

 group of configuration settings.

2. Memory Configuration

Option Values: <None>

Help Text:

View/Configure memory information and settings.

Comments:Selection only. Position to this line and press the <Enter> key to go to the 

Memory Configuration

 group of configuration settings.

3. Mass Storage Controller Configuration

Option Values: <None>

Help Text:

View/Configure mass storage controller information and settings.

Comments:Selection only. Position to this line and press the <Enter> key to go to the 

Mass Storage Controller Configuration

 group of configuration settings.

4. Serial Port Configuration

Option Values: <None>

Summary of Contents for S1200BT



























































































































Reviews:

No comments