Intel® Server System M70KLP Family Service Guide
64
5.
Unpack the new battery
Figure 80. System Battery Installation
6.
Orient the battery so that its positive (+) side is facing up.
7.
Carefully insert the new battery into the battery socket. Ensure it is locked in place.
Note:
After the system is reassembled and AC power is applied to the system, it will be necessary to access
the <F2> BIOS Setup utility at first power-on to reset the system time and date, and reset BIOS options to
their original settings.
5.4
Power Supply Module Replacement
Required Tools and Supplies
•
Anti-static wrist strap and other anti-ESD precautions followed (recommended)
•
Replacement 2000W power supply module
Average Time to Complete:
< 3 minutes
Procedure Prerequisites
•
It is recommended that the system be powered down and unplugged from the AC power source
before replacing a faulty power supply module. However, power supply modules are hot-
swappable**. If necessary, the following procedure can be performed while the system is still
operational.
** Note:
A power supply module is only hot-swappable (replaced without first powering down the system) if
the system is configured with two power supply modules and remains operational (powered on) after
platform management reports that a power supply failure has occurred and power redundancy is lost.
Figure 81. Power Supply Module Extraction
Summary of Contents for M70KLP Series
