Intel M70KLP Series, Service Manual

Page: 58 / 109

Intel® Server System M70KLP Family Service Guide
56
The low-profile air duct used in the GPU enabled system option will accommodate 1U processor heat sinks
and allow support for four half-height/half-length PCIe add-in cards on the server board, one (1) GPU add-in
card (Full-Height Full-Length Double-wide) + one (1) Full-Height Half-Length PCIe add-in card from each
riser card assembly. The top side of the air duct has mounting features for an M.2 interface board capable of
supporting up to two (2) SATA M.2 SSDs, and support for one (1) Intel® RAID Maintenance Free Backup
(RMFBU) module.
The following illustrations identify the features found on the back panel for both the Standard and GPU
enabled system options. All I/O connectors, buttons, LEDs, OCP support, and power supply bays will be
common between the two system options.
The base Standard system option includes support for up to six (6) server board mounted PCIe* Gen3 add-in
cards. Riser card options adds support for an additional six (6) PCIe Gen 3 add-in cards
1 .
Figure 70. Standard System - Back Panel Features
The GPU enabled system option supports up to four (4) server board mounted PCIe Gen 3 add-in cards. With
two PCIe riser cards, the system will also support up to two (2) Full-Height Full-Length Double-Wide GPU
add-in cards + two (2) Full-Height Half Length PCIe Gen 3 add-in cards
1
.
Figure 71. GPU Enabled System – Back Panel Features
1
Some riser card add-in slots require that PCIe bus lanes be cabled to the riser cards from one or more of the PCIe
slim-line connectors on the server board.
OCP 3.0 Add-in
card bay
Riser #0
Riser #1
Server Board mounted
add-in card Slots
Slo
t #
0
Slo
t #
2
Slo
t #
4
Slo
t #
1
Slo
t #
3
Slo
t #
5
VGA Mgmt.
Port
USB
3.0
1
0
OCP Hot Plug
Button
(Not Supported)
PCIe – HH, HL
PCIe – HH, HL
PCIe – HH, HL
PCIe – FH, HL
PCIe – FH, HL
PCIe – FH, HL
PC
Ie
x1
6
–
H
H
, H
L
PC
Ie
x1
6
–
H
H
, H
L
PC
Ie
x8
–
H
H
, H
L
PC
Ie
x8
–
H
H
, H
L
PC
Ie
x8
–
H
H
, H
L
PC
Ie
x8
–
H
H
, H
L
Riser #1
F
Power Supply
Modules
Server Board mounted
add-in card slots
Slo
t #
0
Slo
t #
2
Slo
t #
1
Slo
t #
3
ID Button/LED
(BMC Reset)
System
Reset
Button
BMC Serial Port
(Not Supported)
Serial Port
(Not Supported)
PCIe – FH, HL
PCIe – FH, FL, DW PCIe – FH, FL, DW
PCIe – FH, HL
PC
Ie
x1
6
–
H
H
, H
L
P
C
Ie
x1
6
–
H
H
, H
L
PC
Ie
x8
–
H
H
, H
L
PC
Ie
x8
–
H
H
, H
L
1
0
Riser #0