USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2018 Intel Corporation. All rights reserved
94
The User SD card will not be deleted or formatted by the flight system. We recommend
to regularly make backup copies of these storage devices and reformat them
afterwards. Especially when working on complex projects, during which the logs are
needed for geo-referencing, it is helpful to start with clean storage media.
Internal SD
card cannot
be accessed.
<- Check Msg
appears
in the status line of the Sta-
tus Display. Push the
related arrow
LEFT
button
on the CTR until the Error
Message Screen is shown.
No internal SD card
will be shown.
Switch OFF the Intel® Falcon™ 8+
UAV. Wait 10 seconds and switch it
ON again. During boot up, the internal
SD card will be formatted and it
should again be accessible. If this
does not help, contact the Intel sup-
port team to get instructions on how
to proceed.
Note
The Intel® Falcon™ 8+ UAV can fly without any active logging device. It is the
responsibility of the user to make sure that all flights can be properly logged if it
is a legal requirement in the country where the system is used.
Table 2.14: Possible Warning (continued)