Intel Atom E660 User Manual Download Page 5

Page: 5 / 67

Intel

Atom™ Processor E660 with Intel

Platform Controller Hub EG20T Development Kit

January 2012

User Manual

Document Number: 324213-002

Contents

12 Carrier Board Connectors .......................................................................................... 37

13 COM Express* Module Configuration Jumpers/Switches................................................. 39
14 Carrier Board Configuration Jumpers/Switches ............................................................. 40
15 Carrier Board LEDs................................................................................................... 47

16 JTAG Chain on the COM Express* Module .................................................................... 49
17 Installing the Intel

PCH EG20T SATA Driver - press F6 ................................................ 56

18 Selecting the SCSI Adapter ....................................................................................... 57

19 USB Host Controller #1 Port Connection...................................................................... 58
20 AUO 8.4 inch Panel .................................................................................................. 61
21 LVDS Cable Connected to the Carrier Board................................................................. 62

22 LVDS Connector and Cable ........................................................................................ 63
23 COM Express* Module and Carrier Board..................................................................... 64
24 Heat Sink Components ............................................................................................. 65

25 Back Side of the Heat Sink ........................................................................................ 65
26 Sequence to Fasten the Screws.................................................................................. 66

Tables

Conventions and Terminology ......................................................................................8

Component Names................................................................................................... 10

Intel Literature Centers............................................................................................. 10

Reference Documents............................................................................................... 11

Development Kit Feature Set Summary....................................................................... 15

COM Express* Interface Implemented Signals ............................................................. 17

Supported LVDS Displays .......................................................................................... 19

Power Measurement Resistors ................................................................................... 31

Digital Multi-Meter Comparison .................................................................................. 32

10 Carrier Board Voltage Rails........................................................................................ 32

11 Carrier Board Connectors .......................................................................................... 38
12 Configuration Jumpers/Switches Setting on the COM Express* Module ............................ 40
13 Configuration Jumper Settings on Carrier Board ........................................................... 41

14 Configuration Switch Settings on Carrier Board ............................................................ 43
15 BSEL Jumper Settings............................................................................................... 44
16 VID vs. V

CC-CORE

Voltage .......................................................................................... 45

17 Carrier Board LEDs................................................................................................... 48
18 JTAG Chain Jumper Options on the COM Express* Module ............................................. 49
19 Software Availability Overview ................................................................................... 51

20 Platform Drivers for the Intel

Atom™ Processor E660 with Intel

Platform

Controller Hub EG20T Development Kit ....................................................................... 52

Summary of Contents for Atom E660




































































Search results

Summary of Contents for Atom E660

Reviews:

Intel Atom E660, User Manual, Page: 5 / 67

Search results

Summary of Contents for Atom E660

Reviews: