manualshive.com logo in svg

Intel Atom E660, User Manual, Page: 53 / 67

Share
Download
Intel Atom E660 User Manual Download Page 53

Intel

®

 Atom™ Processor E660 with Intel

®

 Platform Controller Hub EG20T Development Kit

January 2012

User Manual

Document Number: 324213-002

53

Software

• Supports Enhanced Intel SpeedStep

®

 Technology

θ

• Supports boot from USB

Note:

Please check BIOS release notes for latest updates and features. Also check the latest 

Specification Updates or Sightings Reports (if available) before implementing any of the 

above features.

5.3.2

Where to Download

The EFI firmware is available at http://edc.intel.com/Platforms/Atom-E6xx/#software.

5.3.3

BIOS/EFI Firmware Update Tool

The development kit EFI firmware can be upgraded/reflashed using either of two 

methods:

• A standalone SPI programmer
• AMI Firmware Update (AFU) utilities

— afuwin
— afudos
— afulnx
— afuefi

These utilities are free tools available on AMI’s web site at 

http://www.ami.com/support/product.cfm

Go to the “Product Support” page, select “Aptio” in the AMIBIOS drop down box and 

click “Submit”.

A Readme file on how to use the tools can be found on the download page.

Note:

The BIOS installed on the development platform is an EFI-based BIOS hence only the 

EFI version of the reflash tool can be used to update the BIOS.

5.3.4

EFI Firmware/BIOS Status Code

If the board does not power up completely, the Port 80 code may provide insight into 

the issue. A complete list of Port 80 checkpoint definitions can be found in 

http://www.ami.com/support/doc/AMI_Aptio_4.x_Status_Codes_PUB.pdf

For processor Memory Reference Code (MRC) status code, it is denoted as below:

• A0: Memory initialization starts
• A1: Read memory strap information
• A2: Program memory controller
• A3: Perform DDR2 initialization sequence
• A4: Clear FIFO in memory controller
• A5: Enable refresh
• A6: Memory initialization ends
• EF: Invalid frequency
• EE:  No  memory

Summary of Contents for Atom E660




































































Reviews:

No comments