Intel Atom E660 User Manual Download Page 54

Page: 54 / 67

Software

Intel

Atom™ Processor E660 with Intel

Platform Controller Hub EG20T Development Kit

User Manual

January 2012

Document Number: 324213-002

Note:

The default MRC status code overlaps with the AMI’s status code hence it requires

proper debugging steps and tracing to isolate the real problem.

5.3.5

Links to Vendors Providing a BIOS Solution for the Intel

Atom™ Processor E660

A custom EFI Firmware is installed on the board included with this development kit.

This BIOS is specific to this board and is not applicable for customer designs. It is

recommended that customer work with one of the following vendors directly to

implement a solution for their design. These BIOS vendors can help provide the right

solution:

• American Megatrends, Inc. (

http://www.ami.com

)

• Phoenix Technologies (

http://www.phoenix.com

)

• Insyde Software (

http://www.insydesw.com

)

• Byosoft Co., Ltd (

http://byosoft.com.cn/en/index.asp

)

5.4

WinCE BSP Vendors

Below are the links to WinCE OS vendors who support the Intel

Atom™ Processor

E660 and Intel

PCH EG20T for Embedded platform:

Adeneo - http://www.adeneo-

embedded.com/srt/en/document/show?location.id:=1360

bSQUARE - http://www.bsquare.com/partners/siliconvendors/intel.asp

Wipro - http://www.wipro.com/pes/alliances/ica/wincebsp.htm

5.5

Intel

Embedded and Media Graphic Driver

The Intel

Embedded and Media Graphic Driver that is validated on the development

platform can be downloaded from

http://edc.intel.com/Platforms/Atom-E6xx/#software.

Note:

Please also see

Intel

Embedded Media and Graphics Driver, EFI Video Driver, and

Video BIOS v1.5 for Windows* XP and Linux* Specification Update

5.6

Virtual Machine Monitor Software (VMM Software)

For customers that want to include an Intel

solution in their platform, please work

with the following vendor directly to implement a solution for their design and usage.

• Tenasys (www.tenasys.com)

Summary of Contents for Atom E660




































































Search results

Summary of Contents for Atom E660

Reviews:

Intel Atom E660, User Manual, Page: 54 / 67

Search results

Summary of Contents for Atom E660

Reviews: