Intel
®
Atom™ Processor E660 with Intel
®
Platform Controller Hub EG20T Development Kit
January 2012
User Manual
Document Number: 324213-002
19
Getting Started
2.5.5
Display
The carrier board has two options for display as follows. Refer to
for the
location.
• LVDS – location is X4
• SDVO – location is X9
Note:
The Intel
®
Atom™ Processor E660 with Intel
®
Platform Controller Hub EG20T
Development Kit supports single channel LVDS only.
lists the displays that have
been tested with the kit.
2.5.6
PCI Express* Slots/ PCI* Slots
• Two PCIe* x1 ports connect to x4 PCIe* slots (X10, X52) for add-in cards.
The X10 slot is alternately used with a PCIe* mini card slot (X8).
• One PCIe* mini card slot (X8) for mini PCIe* card module. This slot is alternately
used with PCIe* slot (X10).
• One PCI slot (X12) for PCI add-in card
• One PCIe* signal switch is used to alternate between the connected devices
• The PCIe* bus complies with the PCI Express* Rev. 1.0a specification.
describes the carrier board PCIe* connection.
Table 7.
Supported LVDS Displays
Manufacturer
Size
Resolution
Back Light
Aspect
Ratio
Part#
LG Display
(18-bit color)
13 inch
(330.2 mm)
1366 x 768
LED
16:9
LP140WH1-TLA1
AUO Display
(24-bit color)
8.4 inch
(213.4 mm)
800 x 600
LED
4:3
G084SN05 V8
Notes:
1.
The protective tape on top of the LVDS connector must be removed prior to installing an LVDS cable.
2.
VGA output is not directly supported. Customers can use PCI Express*-based x1 discrete external 3D
graphics cards, or a third-party component available on an ADD2-N card through the SDVO interface.