Intel Atom E660 User Manual Download Page 10

Page: 10 / 67

Introduction

Intel

Atom™ Processor E660 with Intel

Platform Controller Hub EG20T Development Kit

User Manual

January 2012

Document Number: 324213-002

1.3

Technical Support

Support Services for your hardware and software are provided through the secure

Intel

Premier Support Web site at https://premier.intel.com. After you log on, you can

obtain technical support, review “What’s New,” and download any items required to

maintain the platform.

1.3.1

Additional Technical Support

If you require additional technical support, please contact your field sales

representative or local distributor.

1.4

Product Literature

You can order product literature from the following Intel literature centers.

Table 2.

Component Names

Component

Name Used in this Document

COM Express* Module equipped with Intel

Atom™

Processor E660

Little Bay

Platform with COM Express* Module equipped with Intel

Atom™ Processor E660 and carrier board equipped with

Intel

Platform Controller Hub EG20T

Crown Bay

Carrier board equipped with Intel

Platform Controller Hub

EG20T

Shell Bay

Note:

Shell Bay is available as a customer reference board for developing applications with the Intel

Platform Controller Hub EG20T.

Table 3.

Intel Literature Centers

U.S and Canada

1-800-548-4275

U.S. (from overseas)

708-296-9333

Europe (U.K.)

44(0)1793-431155

Germany 44(0)1793-421333

France 44(0)1793-421777

Japan (fax only)

81(0)120-47-88-32

Summary of Contents for Atom E660




































































Search results

Summary of Contents for Atom E660

Reviews:

Intel Atom E660, User Manual, Page: 10 / 67

Search results

Summary of Contents for Atom E660

Reviews: