Intel Atom E660 User Manual Download Page 11

Page: 11 / 67

Intel

Atom™ Processor E660 with Intel

Platform Controller Hub EG20T Development Kit

January 2012

User Manual

Document Number: 324213-002

Introduction

1.5

Reference Documents

Table 4

is a partial list of the available collateral. For the complete list, contact your

local Intel representative.

Table 4.

Reference Documents (Sheet 1 of 2)

Document

Document No./Location

Little Bay – Bill of Materials (BOM) / Parts List

425970

Little Bay – Customer Reference Board File

425969

Little Bay Schematic

433299

Intel

Atom™ Processor E6xx Series Datasheet

324208

Intel

Atom™ Processor E6xx Series-based –

Platform Design Guide

433311

Intel

Atom™ Processor E6xx Series – Sightings

Report (SR)

433308; Note

Intel

Atom™ Processor E6xx Series Thermal and

Mechanical Design Guidelines

324210

Shell Bay – Bill of Materials (BOM) / Parts List

439439

Shell Bay – Customer Reference Board File

431138

Shell Bay – Customer Reference Board Schematic

432866

Intel

Platform Controller Hub EG20T Datasheet

324211

Intel

Platform Controller Hub EG20T – Platform

Design Guide

433342

Intel

PCH EG20T – Boundary Scan Description

Language (BSDL) File

426985

Intel

PCH EG20T – I/O Buffer Information

Specification (IBIS) Models

426984

Intel

PCH EG20T – Cadence* Allegro* OrCAD* and

Concept* Schematic Symbol Files

432874

Intel

Platform Controller Hub EG20T – Sightings

Report

438312; Note

Intel

Embedded Media and Graphics Driver, EFI

Video Driver, and Video BIOS v1.5 for Windows* XP

and Linux* Specification Update

445348

Specifications

Advanced Configuration and Power Interface,

Version 3.0 (ACPI)

http://www.acpi.info/spec.htm

Alert Standard Format Specification, Version 1.03

http://www.dmtf.org/standards/asf

AP-728 ICH Family Real Time Clock (RTC) Accuracy

and Considerations Under Test Conditions

http://www.intel.com/Assets/PDF/appnote/292276.pdf

ATX12V Power Supply Design Guide, Version 1.1

http://www.formfactors.org/

Enhanced Host Controller Interface Specification for

Universal Serial Bus, Revision 0.96 (EHCI)

http://developer.intel.com/technology/usb/ehcispec.ht

ExpressCard* Standard Release 1.0

http://www.expresscard.org

Intel

High Definition Audio Specification

http://www.intel.com/standards/hdaudio

RS - Intel

Serial Digital Video Out (SDVO) Port

External Design Specification (EDS)

Note

Notes:

Sightings Reports will only be available when there are sightings to report.

Contact your Intel Field Representative for the latest version of this document.

Summary of Contents for Atom E660




































































Search results

Summary of Contents for Atom E660

Reviews:

Intel Atom E660, User Manual, Page: 11 / 67

Search results

Summary of Contents for Atom E660

Reviews: