Advanced Settings
51
8.Remote Controller Setup
Setting Item
Default Value
Setting Details
Remote ID
1
Select an ID for the unit's remote controller from
"1", "2", and "3" to prevent interference between
the unit and other Integra/Onkyo components
that are installed in the same room. After
changing the ID on the main unit, change the
ID on the remote controller accordingly with the
following procedure.
1. While holding down Receiver, press Q Setup
for about 3 seconds until the Receiver button
stays lit.
2. With the number buttons, press one of 1, 2,
and 3. The Receiver button flashes twice.
Remote Mode Setup
–
Input and register the remote controller code of
other devices.
r
For registration of the remote control code,
refer to "Operating Other Components Using
Remote Controller".
9.Lock Setup
Setting Item
Default Value
Setting Details
Setup
Unlocked
The Setup menu will be locked to protect the
settings.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
