Advanced Settings
21
Advanced Settings
How to Set
The unit allows you to configure advanced settings, such as
to remap the input and input selector, or configure various
speaker settings in order to provide even better experience.
Make the settings in "Setup" of the HOME menu.
z
Operation
: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return. To return to the
HOME menu, press Home.
Operation
1.
Press Receiver on the remote controller.
r
Always press Receiver first to change the remote
controller to RECEIVER mode (the mode to operate
this unit) since its mode may be changed to operate
another component.
2.
Press Home to display the HOME menu.
3.
Select "Setup" with the / cursors and press Enter.
Setup
HOME
4.
Press / to select the desired menu, and then press
Enter.
SETUP
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Composite Video Input
5. Digital Audio Input
1. Input/Output Assign
5.
With the / / / cursors, select the desired item to
configure the settings.
r
When "ENTER" is displayed on the setting item,
press Enter.
Monitor Out
Zone 2 Monitor Out
Resolution
Select which HDMI output you connected to TV. HDCP 2. 2 is available for MAIN output.
MAIN
Not Use
Through
1-1. Monitor Out
To save changes and finish the setting
: Press Home to
exit.
