Advanced Settings
28
Setting Item
Default Value
Setting Details
Back
7.0ft/2.10m
Specify the distance between each speaker and the
listening position.
r
The setting is displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r
This setting cannot be changed when "Speaker
Settings" - "Powered Zone 2" is set to "Yes" and
Zone 2 is turned on.
Surround Left
7.0ft/2.10m
Specify the distance between each speaker and the
listening position.
Subwoofer
12.0ft/3.60m
Specify the distance between each speaker and the
listening position.
Height Left
9.0ft/2.70m
Specify the distance between each speaker and the
listening position.
r
This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height Speakers Type"
is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
Height Right
9.0ft/2.70m
Specify the distance between each speaker and the
listening position.
r
This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height Speakers Type"
is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
r
When the speaker is set to "No" or "None" in "Speaker Configuration", the settings for "Speaker
Distance" cannot be changed.
r
Default values vary depending on the regions.
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item
Default Value
Setting Details
Front Left
0.0dB
Select a value between "-12.0dB" to "+12.0dB"
(in increments of 0.5dB). A test tone will be output
each time you change the value. Select the
desired level.
Wide Left
0.0dB
Select a value between "-12.0dB" to "+12.0dB"
(in increments of 0.5dB). A test tone will be output
each time you change the value. Select the
desired level.
r
This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes".
Center
0.0dB
Select a value between "-12.0dB" to "+12.0dB"
(in increments of 0.5dB). A test tone will be output
each time you change the value. Select the
desired level.
Wide Right
0.0dB
Select a value between "-12.0dB" to "+12.0dB"
(in increments of 0.5dB). A test tone will be output
each time you change the value. Select the
desired level.
r
This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes".
Front Right
0.0dB
Select a value between "-12.0dB" to "+12.0dB"
(in increments of 0.5dB). A test tone will be output
each time you change the value. Select the
desired level.
Surround Right
0.0dB
Select a value between "-12.0dB" to "+12.0dB"
(in increments of 0.5dB). A test tone will be output
each time you change the value. Select the
desired level.
