Advanced Settings
22
1.Input/Output Assign
Monitor Out
The video input signals input to the unit will be converted when they are output from the
HDMI OUT jack to the TV so that their resolution can match that of the TV used.
Setting Item
Default Value
Setting Details
Monitor Out
MAIN
Select the HDMI jack to connect the TV.
"MAIN": When connecting the TV to the HDMI OUT
MAIN jack
"SUB": When connecting the TV to the HDMI OUT
SUB jack
r
The resolution of the input signal does not change
when output through HDMI OUT SUB jack.
"MAIN+SUB": When connecting to both the MAIN
and SUB jacks
r
Video signals input to the composite video input
jack or the COMPONENT VIDEO input jacks will
be upconverted to HDMI signals and then output
from the HDMI output jack.
r
If "MAIN+SUB" is selected
– Only "Through" or "Auto" can be selected in
"Resolution".
– The output resolution will differ between
"Through" and "Auto".
– The resolution of the input signal does not
change when output through HDMI OUT SUB
jack.
r
The HDMI jack of this unit is compliant with
HDCP2.2 (HDMI OUT MAIN and HDMI IN3 jacks
only).
Zone 2 Monitor
Out
Not Use
Make the setting when you output to the Zone 2 TV
connected to the HDMI OUT ZONE2 jack
"Use": Enable this function
"Not Use": Disable this function
r
The setting is set to "Not Use" if "Monitor Out" is
set to "SUB" or "MAIN+SUB".
Setting Item
Default Value
Setting Details
Resolution
Through
Specify the output resolution of the HDMI OUT jacks.
The image resolution of the unit will be converted so
that it can match the resolution supported by the TV
used.
"Through": The output resolution will be the same as
that of the input signals.
"Auto": The resolution will automatically be converted
according to the resolution supported by the TV.
"480p (480p/576p)", "720p", "1680×720p", "1080i",
"1080p", "2560×1080p": Select the desired
resolution.
"4K": About four times as high resolution as 1080p
(3840×2160 or 4096×2160 pixels depending on the
resolution supported by the connected TV)
"Source: The output resolution will be that specified
KP2KEVWTG#FLWUV4GUQNWVKQPKPVJG|5QWTEG
Setup" section.
r
If "1080p" is selected, 1080p/24 input signals will
be output with an unchanged resolution.
r
If the selected resolution is not supported by the
monitor, the video is output in the same resolution
as the input signal.
r
If "4K" is selected, video signals may not be
output to some types of TV. For details, see
"Supported Video Resolution of HDMI OUT MAIN/
SUB Jacks" in "Reference Information".
r
If "Monitor Out" is set to "SUB", this setting will be
set to "Through".
r
If "Monitor Out" is set to "MAIN+SUB", this setting
can be selected only the "Through" and "Auto".
r
You can check the video on the TV while making
this setting. Select the value with the cursors
and press ENTER. Press Return if no video
is displayed. (Except when "NET" or "USB" is
selected)
