manualshive.com logo in svg

Integra DTR-50.6, Advanced Manual, Page: 31 / 103

Share
Download
Integra DTR-50.6 Advanced Manual Download Page 31

Advanced Settings

31

3.Audio Adjust

Configure various settings related to sound, such as settings for listening to multiplex audio 
or multilingual TV broadcasts and sound field settings for listening modes.

Multiplex/Mono

Setting Item

Default Value

Setting Details

Multiplex  
Input Channel

Main

Set the audio channel or language to be output 
when playing multiplex audio or multilingual TV 
broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be 
output at the same time.

r

If multiplex audio is being played, "1+1" will 
be displayed when Display on the main unit 
is pressed.

Mono  
Input Channel

Left+Right

Set the input channel to use for playing any 
2 ch digital source such as Dolby Digital, or 
2-ch analog/PCM source in the Mono listening 
mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels

Mono  
Output Speaker

Center

Select the speaker to output monaural audio in 
the Mono listening mode.
"Center": Audio is output from the center 
speaker.
"Left/Right": Audio is output from the front L/R 
speakers.

r

The setting will be fixed to "Left/Right" if 
"Speaker Configuration" - "Center" is set to 
"None".

Dolby

Make the settings for Dolby listening mode.

Setting Item

Default Value

Setting Details

Loudness 
Management

On

Enable the Late Night function that allows you to 
enjoy surround sound of Dolby TrueHD playback 
even in low volume.
"On": Use this function
"Off": Do not use this function

Center Spread

Off

Adjust the width of the front sound field created 
during Dolby Surround listening mode playback.
"On": The sound field is spread to left and right.
"Off": The sound field is centralized.

r

The setting will be fixed to “Off” if “Speaker 
Configuration” - “Center” is set to “None”.

DTS

Make the settings for DTS Neo:6 Music listening mode.

Setting Item

Default Value

Setting Details

Neo:6 Music  
Center Image

2

Adjust the width of the sound field of the front 
channel when playing in the DTS Neo:6 Music 
listening mode.
"0" to "5": Selecting a smaller value brings the 
sound field of the front channel to the center while 
selecting a larger value spreads the sound field of 
the front channel to left and right.

Theater-Dimensional

Make the settings for Theater-Dimensional mode.

Setting Item

Default Value

Setting Details

Listening Angle

Wide

Set the angle of the front left and right speakers 
relative to the listening position when playing in 
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°

r

Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide" 
is selected.

Summary of Contents for DTR-50.6








































































































Reviews:

No comments