INSYS EDGE 5.0 Series, Manual

Page: 12 / 107

Mounting INSYS GPRS/EDGE 5.0 serial
12
4 Mounting
4.1 Front Panel
RS
2
3
2
An
t.
INSYS
GPRS
Reset
Power
Status
Connect
RX/TX
Signal
SI
M
10
B
a
s
e
-T
The INSYS GPRS/EDGE 5.0 serial has five LEDs for the operating state:
Name Colour LED off LED on LED blinks LED flashes
Power Green
No supply volt-
age Supply voltage
available
Status
Yellow
GSM engine
not logged into
network
TCP connection to
the remote ter-
minal has been
established
Initialization
phase
Slow flashing (100 ms
on, 1900 ms off):
INSYS
GPRS/EDGE 5.0 serial
logged into the GSM
network
Fast flashing (100 ms
on, 900 ms off):
PPP
dial-up successful, IP
address received from
provider; in the operat-
ing mode "TCP Listen",
this is the normal state
Connect Yellow
No connection
is established
The connection to
the remote ter-
minal is estab-
lished (Carrier
detected)