INSYS EDGE 5.0 Series Manual Download Page 19

Page: 19 / 107

INSYS GPRS/EDGE 5.0 serial

Mounting

Insert the SIM card into the card holder.

Reinsert the SIM card holder into the SIM card reader.



Insert the card holder. The contacts of the SIM card must point
to the left when looking at it from the front of the device.

Switch the power supply on.



The device will boot, the power LED will light up continuously, and the
status LED will blink.

Wait until the boot process is completed.



The Status LED goes out which indicates that the boot process is com-
pleted.



The signal LED is blinking.

4.5.5

Checking the Settings

Read out the settings.



Click on the button "Read settings" in the software HSComm
GPRS.



A symbol next the entry field of the PIN will show, if the INSYS
GPRS/EDGE 5.0 serial has been registered.

Summary of Contents for EDGE 5.0 Series












































































































Search results

Summary of Contents for EDGE 5.0 Series

Reviews:

Related manuals for EDGE 5.0 Series

Brands by name

Popular brands

INSYS EDGE 5.0 Series, Manual

Search results

Summary of Contents for EDGE 5.0 Series

Reviews:

Related manuals for EDGE 5.0 Series

Brands by name

Popular brands