INSYS EDGE 5.0 Series, Manual

Page: 11 / 107

INSYS GPRS/EDGE 5.0 serial Utilization Notes
11
3 Utilization Notes

This manual uses the symbol for especially important notes. Further notes will
be marked accordingly.

All factory settings are marked “default”.

In Chapters 4.6 to 7 the description consists of two columns. Individual functions
are described on the left side. The according
AT
commands and the modem re-
sponses can be found in the right column.
Function description
AT
command
Example:
Dialing IP 192.168.0.2 and port 1234
ATD192.168.0.2:1234
All
AT
commands start with the letters
AT
and end with a “Return” (Carriage Re-
turn - CR).
AT
commands can be entered in capital or small letters. The command is
processed after the modem received a CR input.

In the following, the used syntax is explained:
ATD AT
command (font: Courier, bold)
<expression>
Input of a parameter
(font: Courier, bold)
[expression
]
Input of an optional parameter
(font: Courier, bold)
expression Response from the modem
(font: Italic)
Examples:
ATD<ip>:<port>
Dialing the IP address
<ip>:<port>
ATD192.168.0.1:1234
Dialing the IP address
192.168.0.1
and
the IP port 1
234
AT**CALLBACK=0,2,0
The phone number that was stored with
AT**CLIP2
is assigned the action “IP Call-
back”.
AT
+COPS=<n>[,<format>,<oper>]
Select network provider and login
AT+COPS=0
Select network provider automatically and
login