INSYS EDGE 5.0 Series, Manual

Page: 31 / 107

INSYS GPRS/EDGE 5.0 serial Connection
31
Alternatively, the settings for the leased line operation can be entered or modi-
fied using the terminal program.
Connection to an IP address
Setting for leased line function
AT**LL=2
Remote terminal IP address
AT**AUTOIP=<ip>
Remote terminal TCP port
AT**AUTOPORTIP=<port>
Save settings
AT**SAVE
Perform RESET,
accept all parameters
AT**RESET
Connection to a domain name
Setting for leased line function
AT**LL=3
Remote terminal IP address
AT**AUTOURL=<url>
Remote terminal TCP port
AT**AUTOPORTURL=<port>
Save settings
AT**SAVE
Perform RESET,
accept all parameters
AT**RESET
Alternative Access for leased line:
For applications which require high availability even if a remote terminal server
fails, a alternative access may be set.
It is based on the following mechanism:
If the INSYS GPRS/EDGE 5.0 serial is restarted in leased line operation, the pre-
defined AutoDial default destination is dialed after 20 seconds. If the connection
setup fails, the device will attempt to dial the AutoDial alternative destination. If
the connection setup to the AutoDial alternative destination fails as well or if no
AutoDial alternative destination was entered, the dialing attempt will be repeated
after a waiting period has expired. First the default destination will be attempted
to read, and in case of a failure, the alternative destination. After each failed dial-
ing attempt (this includes both destinations), the waiting period is increased (in
steps of 40, 80, 320, 180 and 3600 seconds). The maximum waiting period is 3600
seconds. After the waiting period has expired, the device will again attempt to es-
tablish a connection to one of the two destinations. The command
AT**LLWAITRST
defines the maximum number of failures. If this maximum
number of failed connection attempts is reached, the device will be restarted.
Only the failed connection attempts to the main destination are rated. The desti-
nation, with which a successful connection is established, will be used as new
AutoDial standard destination until the device is restarted.