AT Command Reference
INSYS Pocket ISDN
70
Command
Description
AT&R
CTS Control
Configures the behaviour of the CTS control line of the INSYS Pocket ISDN.
AT&R
The INSYS Pocket ISDN CTS control line follows all
changes of RTS
AT&R1
CTS is always ON
AT#R
Processing incoming calls
Determines the behaviour of the INSYS Pocket ISDN if an incoming call is
received.
If
AT#R1
is enabled, all incoming calls are ignored regardless of all other
settings.
AT#R
Disables the automatic rejection of all incoming calls
AT#R1
Enables the automatic rejection of all incoming calls
ATS
Displays and sets the internal S registers
ATS
nn
?
Displays the current value (decimal) of the selected register
nn
ATS
nn
=
xx
Sets the selected register
nn
to the decimal value
xx
.
For an overview of the S registers, refer to section 1
AT&S
DSR Processing
Configures the behaviour of the DSR control line of the INSYS Pocket ISDN.
AT&S
INSYS Pocket ISDN control line DSR is always ON
AT&S1
DSR ON indicates that an ISDN connection is established
and synchronised
ATV
Message format
ATV
Reply is output as number (followed by <
>)
ATV1
Reply is output as text
AT&V
Shows the current configuration
AT&V
Displays the current configuration of the AT command set
settings, including the stored ISDN numbers
AT&V1
Displays the current configuration of the extened AT com-
mand set settings
AT*V
Alarm texts
AT*V
<n>?
Querying the alarm texts
AT*V
<n>
Entering the alarm texts following the prompt
NEW
ALARMTEXT:
<n>
0
Collective message (160 characters without individual
messages, 120 characters with individual messages)
1
Individual message for alarm 1
2
Individual message for alarm 2
The index n=0 may be omitted.
Note:
Not valid for Socket ISDN. I-modul ISDN HIX and Pocket
ISDN.
