Initial Operation
INSYS Pocket ISDN
24
8
Initial Operation
This section describes how to commission the INSYS Pocket ISDN, i.e.
connect the INSYS Pocket ISDN to a PC, connect it via an NTBA to the ISDN
network and test it.
Connecting the INSYS Pocket ISDN to a PC
How to connect the INSYS Pocket ISDN to a PC via the serial interface.
You will need the 9-pin serial cable.
You will need a free serial interface at the PC.
Use preferably serial interfaces which are actually at the PC as "real"
hardware. Virtual serial interfaces or USB-to-Serial solutions may
cause problems.
1.
Connect the 9-pin serial cable with the INSYS Pocket ISDN and
tighten the screws of the connector.
2.
Connect the 9-pin serial cable to a free serial interface of your PC.
Connecting the INSYS Pocket ISDN to the ISDN network
You will need the enclosed ISDN phone cable
You will need an NTBA, which is connected to the ISDN network or a PABX
with S0 bus.
1.
Plug one RJ connector of the cable into the RJ phone socket at the
INSYS Pocket ISDN.
2.
Plug the other RJ connector of the cable into the S0 socket of your
NTBA or PABX.
Connecting the INSYS Pocket ISDN to the power supply
How to connect the INSYS Pocket ISDN to the power supply.
You will need the enclosed power supply unit.
1.
Plug the power supply connector of the enclosed power supply unit
into the INSYS Pocket ISDN and the power supply unit into the
power outlet.
Install the INSYS Pocket ISDN driver for Windows XP
How to install the INSYS Pocket ISDN driver.
You will need the enclosed CD.
You will need a INSYS Pocket ISDN, which is connected to the PC, the ISDN
network and the power supply.
