INSYS Pocket ISDN
Functions
39
10.5
Connection Configuration of the INSYS Pocket ISDN at
the ISDN Basic Access
10.5.1
Configuration at Multipoint Interface (PMP, Point-to-
Multipoint)
In order to operate the INSYS Pocket ISDN at a multipoint interface, you must
configure it accordingly and configure an own phone number (MSN). The MSN is
always configured without area code. When operating at a PABX, you must only
enter the extension number.
The operation at a multipoint interface is configured and "*" is entered as phone
number in the default setting.
Configuration with AT commands
To configure the multipoint interface
connection type use the command
AT**PTP=0
To set the phone number (MSN) use the
command
AT**MSN=<N>
To save the settings use the command
AT&W
