INSYS Pocket ISDN
Functions
49
10.12
Sub-Addressing
The transmission of a sub-address can be supported for incoming and outgoing
calls using the additional ISDN service SUB. The sub-address is sent transparently
from the calling side to the called side before the B channel connection is
established completely.
Please note that this ISDN service has to be enabled by the ISDN service provider
usually. It might be possible that additional fees incur.
The sub-address is separated from the phone number using a "/".
The sub-addressing function can be used with the dialling procedures of the AT
command set, PAD x.3 and automatic call.
The own sub-address (calling sub-address) can be configured with the
TA+Configurator command
sub
. The sub-address can be entered as supplement
into all tables, which contain an ISDN number for dialling or checking .
Configuration with AT commands
In order to transmit a sub-address to the
called remote terminal, use the command
Replace
<number>
with the phone number
of the remote terminal.
Replace
<subaddress>
with the sub-
address to be transmitted.
ATD<number>/<subad-
dress>
Incoming sub-addresses are displayed as
extensions of the messages
RING
and
CONNECT
RING <number>//<subad-
dress>
CONNECT <num-
ber>//<subaddress>
