background image

INSYS Pocket ISDN 

Preface 

 

 

1

 

Preface 

This manual allows for the safe and efficient use of the product. The manual is part 
of the product and must always be stored accessible for installation, commission-
ing and operating personnel. 

1.1

 

Defects Liability Terms 

A usage not according to the intended purpose, an ignorance of this documenta-
tion, the use of insufficiently qualified personnel as well as unauthorised modifica-
tions exclude the liability of the manufacturer for damages resulting from this. The 
liability of the manufacturer ceases to exist. 
The regulations of our Delivery and Purchasing Conditions are effective. These can 
be found on our website (www.insys-icom.de/imprint/) under “General Terms and 
Conditions“. 

1.2

 

Feedback 

We are permanently improving our products and the associated technical docu-
mentation. Your feedback is very helpful for this. Please tell us what you like in par-
ticular on our products and publications and what can be improved from your point 
of view. We highly appreciate your suggestions and will include them in our work 
to support you and all our customers. We are looking forward to any of your feed-
back. 
 
Please send an e-mail to [email protected]
 
We'd like to know your applications. Please send us a few headwords that we 
know the applications you solve using products of INSYS icom. 

 

 

Summary of Contents for Pocket ISDN





















































































Reviews: