6
6. If prompted, enter the 6-digit code from the email invitation you received from the Podder™,
then tap
Done
.
The “
Connect with Podder
” screen appears.
7. Tap
Connect
. The Omnipod VIEW™ app creates a connection to the Podder’s™ data.
Note:
If a connection is not made, the screen explains the most likely reasons for the failure to
connect. Tap
OK
and try again. If necessary, request a new invitation from the Podder™.
Create a Profile for the Podder™
The next step is to create a profile for the Podder™. If you will view data from multiple Podders™, this
profile helps you quickly find a Podder™ on the Podder™ list.
To create the Podder™ profile:
1. Tap
Create Podder Profile
.
2. Tap
Podder™ Name
and enter a name for the Podder™ (up to 17 characters). Tap
Done
.
3. Optional: Tap
Podder™ Relationship
, and enter your relationship to the Podder™ or another
identifying comment. Tap
Done
.
4. Tap
Add Image
to add a photo or icon to help identify the Podder™. Then do one of the
following:
• To use your phone’s camera to take a photo of the Podder™, tap
Take Photo
. Take the photo
and tap
Use Photo
.
Note:
If this is your first Podder™, you will need to allow access to your photos and camera.
• To select a photo from your phone’s photo library, tap
Photo Library
. Then tap the photo that
you would like to use.
• To select an icon instead of a photo, tap
Select Icon
. Select the icon and tap
Save
.
5. Tap
Save Profile
.
6. Tap
Allow
(recommended) for the Notifications setting. This allows your phone to alert you
whenever it receives Omnipod® alarms or notifications.
Selecting
Don’t Allow
prevents your phone from showing Omnipod® alarms and notifications
as on-screen messages, even when the Omnipod VIEW™ app is running.
You can change this Notification setting at a later date through your phone’s settings.
Note:
To see these messages, the Omnipod VIEW™ app’s Alerts setting must also be enabled.
This setting is enabled by default (see “Alerts Setting” on page 12).
7. Tap
OK
when setup is complete.
The Home screen appears. For an explanation of the Home screens, see “Checking a Podder’s
Data with the App” on page 8 and “About the Home Screen Tabs” on page 16.
The icon for launching the Omnipod VIEW™ app is found on your phone’s Home
screen.
