16
Switch to a Different Podder™
The Omnipod VIEW™ app shows the current Podder™ at the
top of the screen.
To view PDM data from a different Podder™:
1. Tap the current Podder’s™ image or name in the header
bar.
A screen appears with the current Podder’s™ image
or icon in the middle of the screen and a list of other
Podders™ at the bottom of the screen.
2. Tap the name of the Podder™ you would like to view,
scrolling down as necessary.
3. Tap
OK
to confirm the switch to the new Podder™.
The Home screen appears showing the data for the newly
selected Podder™.
Note:
If a Podder™ removes you from their list of Viewers,
you will receive a message and their name will not appear on
your Podder™ list.
Remove a Podder™
If you remove a Podder™ from your list, you will no longer be able to view that Podder’s™ PDM data.
Note:
You can only remove the current Podder™. To change who is the current Podder™, see “Switch
to a Different Podder™” in the previous section.
To remove a Podder™:
1. Tap the current Podder’s™ name in the header bar of any screen.
A screen appears with the current Podder’s™ image or icon in the middle of the screen.
2. Tap the pencil icon ( ) in the upper right of the current Podder’s™ image.
3. Tap
Remove
, then tap
Remove
again.
The Podder™ is removed from your list and your name is marked as “Disabled” on the Podder’s™
Omnipod DISPLAY™ app list of Viewers. If you accidentally remove a Podder™, you must ask the
Podder™ to send you another invitation.
About the Omnipod VIEW™ App
This section provides additional details about the Omnipod VIEW™ screens and the process of
sending PDM data to the Omnipod VIEW™ app.
About the Home Screen Tabs
The Home screen appears when you open the Omnipod VIEW™ app or when you tap the DASH tab
( ) at the bottom of the screen. If more than three days have passed since the last PDM update, the
header bar is red and no data is shown on the Home screen.
