12
Alerts Setting
You control which Alerts you see as on-screen messages using the Alerts setting, combined with
your phone’s Notifications setting.
As shown in the following table, both the iOS Notifications and the app’s Alerts settings must be
enabled to see the Alerts; however, only one of these needs to be disabled to prevent seeing Alerts.
To see Alerts:
To prevent Alerts:
iOS Notifications setting:
Allow
Don’t Allow
and
or
Alerts setting:
All Alerts
or
Hazard Alarms Only
Toggle off both Alerts settings
To change the Alerts settings for a Podder™:
1. Navigate to:
Settings
tab ( ) >
Alerts
.
2. Tap the toggle next to the desired Alerts setting to turn
the setting on ( ) or off ( ):
• Turn on
All Alerts
to see all hazard alarms, advisory
alarms, and notifications. By default,
All Alerts
is on.
• Turn on
Hazard Alarms Only
to see only PDM
hazard alarms. Advisory alarms or notifications are
not shown.
• Turn off both settings if you do not want to see any
on-screen messages for alarms or notifications.
These settings do not affect the Alerts screen; every alarm and
notification message always appears on the Alerts screen.
Note:
The term “Notification” has two meanings. The PDM’s “Notifications” refers to informational
messages that are not alarms. The iOS “Notifications” refers to a setting that determines whether
Omnipod® Alerts appear as on-screen messages when you are using your phone.
Multiple Podders™
If you are viewing data from multiple Podders™, you must set each Podder™’s Alerts setting separately
(see “Switch to a Different Podder™” on page 16).
If you have accepted invitations to view data from multiple Podders™, you will see Alerts messages
for any Podders™ whose Alerts settings are turned on, whether they are the currently selected
Podder™ or not.
