Insignia IS-TV040921, Owner'S Manual

Page: 23 / 107

ENGLISH
- 23 - EN
SPECIAL PLAYBACK FUNCTION
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function, press [REPEAT]
during playback.
¡ The repeat mode changes as described below every
time you press the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
( current chapter repeat) ( current title repeat)
(repeat off )
NOTES:
¡ Repeat Title/Chapter is not available with some
scenes.
¡ The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, press [REPEAT]
during playback.
¡ The repeat mode changes as described below every
time you press the button.
CD
TRACK ALL OFF
( current track repeat) ( entire disc repeat)
(repeat off )
NOTES:
¡
Repeat setting will be cleared when moving to other
track.
¡
Repeat playback does not function during A-B
repeat playback.
A-B REPEAT
1
Press [A-B] at your chosen starting point.
¡
“ A-” appears briefly on the TV screen.
2
Press [A-B] again at your chosen end point.
¡ “ A-B” appears briefly on the TV screen, and the
repeat sequence begins.
3
To exit the sequence, press [A-B].
NOTES:
¡ The A-B repeat section can only be set within the
current title (for DVDs) or current track
(for Audio CDs).
¡ A-B repeat is not available with some scenes in
DVD.
¡ To cancel the A point which was set, press
[CLEAR] .
¡
A-B repeat playback does not function during title,
chapter, track or all repeat playback.
CD DVD-V
PROGRAM
You may determine the order in which tracks will play.
1
In the stop mode, press [MODE].
¡ The “PROGRAM” screen will appear.
2
Press [
▲
/
▼
] to select a track, then press
[ENTER].
¡ Press [CLEAR] to erase the
most recently entered track.
¡
If the entire Program cannot be
displayed at once on a screen,
“
G
” appears to go to the next
page and “
H
” appears to go
back to the previous page.
3
Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Press [PLAY
O
] to play the programmed tracks.
NOTES:
¡
While the program is being played back, pressing
[STOP
C
] works as follows.
¡
Press [STOP
C
] once and then [PLAY
O
] again,
playback will restart from the point where
[STOP
C
] was pressed. (Program continued)
¡
Press [STOP
C
] twice and then [PLAY
O
] again,
playback will restart from the track in the usual
way. (Program canceled)
¡
Up to 99 tracks can be entered.
¡ To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step
2 .
¡
If you like to repeat the current track in the pro-
gram, press
[REPEAT] several times until “
TRACK” appears during playback. If you like to
repeat the entire program press
[REPEAT] several
times until “ ALL” appears during playback.
CD
TOTAL 1:03:30
2/3 1/4
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
1 3:30
1 3:30
CD-DA
ENTER
CLEAR
PLAY
2 4:30
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
PROGRAM
RANDOM PLAYBACK
This function shuffles the playing order of tracks
instead of playback in the sequence.
1
In the stop mode, press [MODE] twice.
¡
“RANDOM” screen appears.
2
Press [PLAY
O
] to start random playback.
NOTE:
¡ If you like to repeat the current track in the random
selection, press
[REPEAT] several times until “
TRACK” appears during playback. If you like to repeat
the entire random selection press
[REPEAT] several
times until “ ALL” appears during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM