30
9. Maintenance
All maintenance, cleaning and repair operations must be
carried out with the machine firmly lowered to the ground
and detached from the tractor, or with disconnected PTO,
engine off and starting key out.
A time of maintenance is defined according to the normal use
of the machine. If the machine is used in very hard conditions
and for a longer time as usual, the time between maintenance
operations must be shorter.
Take care that grease nipples on the machine are always
clean.
After each maintenance operation check that all guards are
fitted on the proper place.
Oil level control
Use always the same type of oil, sintetic oil which is appropriate for
gearboxes. The producer uses MOBIL, MOBILUBE 1SHC 75W-90. As an
alternative you can use also SHELL SPIRAX 75w90 or CASTROL TAF-X
75w90.
To check the oil level
-remove the shield of the drive
Fig.23/1
and PTO shaft shield
Fig.23/2
-unscrew the plug for oil control
Fig.26/3
. The level of oil must be till this
plug.
-add the oil if necessary
Fig.26/2
To change the oil
-remove the shield of the drive
Fig.26/1
and PTO shaft shield
Fig.26/2
-unscrew the plug for oil control Fig.24/3.
-let the oil off into the appropriate container (Fig.24/1)
-tighten the plug back
-pour in a new oil
Fig.24/2
to the level of the plug
Fig.24/3
Summary of Contents for DUPLEX 800
Page 21: ...21 Fig 12 Fig 13 1 2 3 ...
Page 39: ...39 ...
