24
7 Operating
It is strictly forbidden to start PTO shaft when the machine is in
the transport position.
Start PTO shaft always at low rotations and free rotating of the
rotor shaft. Slowly increase the rotations on working rpm.
Before operating always check the area for mulching that there
is no hard objects like stone, rocks, wood, specially on
abandoned areas.
At too low rotations the blades can hit with the back on the
rotor and injure or debalance it.
In the case of damaged rotor shaft some vibrations and
consequently cracks on the frame can appear. Stop
immediately with operating. Switch off PTO shaft, check
rotor shaft and components and change damaged or broken,
missing parts. If vibrations are still on the rotor shaft, it must
be balanced before operating.
Starting the machine
When arriving on mulching area put the machine into the working
position in the following order:
- Deactivate transport blocade with the rope (
Fig.16),
- Lower left and right mulching wing into the horisontal position (one
after another, never lower both wings at the same time)
- Switch on INO SECURE Tronic
(Fig.17)
- lower the machine onto the working height and align the wings
–
see
the arrows (
Fig.17/a
). This position allows the best floating and long
lasting of the drive part.
- Start the machine.
Summary of Contents for DUPLEX 800
Page 21: ...21 Fig 12 Fig 13 1 2 3 ...
Page 39: ...39 ...
