35
3.
After every 5 working hours always:
•
Check that the nuts are tightened enough,
•
Grease parts if necessary
•
Check a wear and condition of working tools,
•
CheckBelts and taper locks
,
•
A condition of safe guards,
•
Make a visual control of the whole machine
4.
After every 25 working hours always:
•
Check the belt tension
•
Check and grease the machine
5.
After every 50 working hours always:
•
Check the oil level in the gearbox,
6.
After every 500 working hours ar oafter 2 years always:
•
change the oil in the gearbox.
Replacement of working tools
Immediately after you notice that working tools are damaged, change
them. If it is necessary to change only few blades, always change the
broken or worn one and the one diametrically opposite in order to
maintain the balance. If the rotor shaft is vibrating after changing the
blades, immediately stop the machine. The machine must be balanced
before any work.
Fig. 31
Summary of Contents for DUPLEX 800
Page 21: ...21 Fig 12 Fig 13 1 2 3 ...
Page 39: ...39 ...
