20
6. Adjustment and setting up
Adjustment of discharge
The machine has a possibility to work in two ways: a discharge before or
behind of rear roller. When a discharge is set behind rear roller (Fig.11/1),
the rear roller is installed close to the rotor shaft and it is self cleaned in
this position. When a discharge is before the rear roller, it is installed in
the position behind and away from the rotor. In this case we recommend
to install a scraper and a deflecting plate as an optional equipment
(Fig.11/2).
Fig.11
To change the position of the rear roller for front or rear discharge it is
necessary to turn the rear roller around the released bolt (Fig.12/1):
-
Release the bolt Fig.12/1,
-
Unscrew bolts Fig. 12/2, 12/3
-
Turn the rear roller around the bolt Fig.12/1,
-
Tighten the bolts
1
2
Summary of Contents for DUPLEX 800
Page 21: ...21 Fig 12 Fig 13 1 2 3 ...
Page 39: ...39 ...
