10
17.
Keep a safety distance from drive parts outside of the machine
(PTO shaft, hydraulic pipes).
18.
Before leaving the tractor with the machine attached disconnect
the tractor, put the machine steadily on the ground (with the
hydraulic lift), apply the hand brake and if the ground is steeply
slooping, wedge the tractor.Take out the starting key.
19.
Do not enter the zone between the tractor and the machine. It is
strongly forbidden to be in this zone if the tractor is not properly
disconnected, hand brake applied and starting key taken out.
Attachment on the tractor and transport
1.
Before attaching the machine on or detaching it off the tractor be
sure that hydraulic lift system is in a neutral position.
2.
check that a category of 3-point linkage on the tractor
corresponds to that one on the machine.
3.
Be careful! There is a danger of injuries when working near or with
3-point linkage.
4.
It is forbidden to be in the zone between the tractor and the
machine while working with the hydraulics.
5.
Put the 3-point linkage into the position that moving of the
machine during transport is not possible.
6.
During transport secure the lever of hydralic lift to avoid any
unplanned moving the machine.
7.
Never leave the tractor cab when the tractor is working.
8.
Adjust driving speed to the road conditions.
Summary of Contents for DUPLEX 800
Page 21: ...21 Fig 12 Fig 13 1 2 3 ...
Page 39: ...39 ...
