Innova IGPCX-27-1, Owner'S Manual

Page: 31 / 76

ENG
29
Installation in a Sliding Sash Window (optional)
1. Connect the rain guards to the insect guard net. Insert all three projections on each rain
guard into the holes in the insect guard net. Side “A” will now be at the top, as indicated
in the diagram.
2. Attach the guard, inserted as above, to the window panel. Push the insect guard net firmly to
ensure that its four projections fit into the holes in the window panel. Side “A” will now be at the
top, as indicated in the diagram, when it is installed in the window.
3. Cut foam seal B (adhesive type) to the proper length and attach to the window frame and to the
side of the sash.
4. Install the window panel into the window frame. Make sure that the exhaust cover is attached to
the window panel. Inner height of the window: 20.5 inches (520 mm). Use the window panel.
Window panel
“A”
“A”
Insect guard net
Hole
Projection
Projection
Rain guard
Foam seal B (adhesive type)