Innova IGPCX-27-1, Owner'S Manual

Page: 16 / 76

ENG
14
Using combination buttons
Pressing the “+” and “-” buttons simultaneously will turn the child lock function on or off.
When the child lock function is activated, the “ ” icon will be displayed on the remote control.
If the remote control is operated, the “ ” icon will flash three times and the remote control will
not send a signal.
After turning off the unit using the remote control, press the “-” button and the “MODE” button
simultaneously to switch between °C and °F.
Operating guide
1. After connecting to the power, press the “ ” button on the remote control to turn on the
air conditioner.
2. Press the “ ” button to select your required mode: AUTO, COOL, DRY, FAN.
3. Press the “+” or “-” button to set your required temperature. (The temperature cannot be
adjusted in auto mode).
4.
Press the “ ” button to set your required fan speed: auto, low, medium or high speed.
Replacement of batteries in the remote control
NOTICE
• During operation, point the remote control signal sender at the receiving window on the unit.
• The distance between signal sender and receiving window should be no more than 8 m, and
there should be no obstacles between them.
• The signal is easily disrupted in a room with fluorescent lights or a wireless phone; the remote
control should be close to the unit during operation.
• Insert new batteries of the same model when replacement is required.
• If you will not be using the remote control for a long time, please take out the batteries.
• If the display on the remote control is fuzzy or there is no display, please replace the batteries.
Child lock function
Switchover function for temperature display
1. Press the reverse of the remote control marked “
“, as illustrated, and then push out the cover of
battery box in the direction of the arrow.
2. Replace the two 7# (AAA 1.5V) dry batteries, and
make sure that the “+” and “-” poles are in the
correct positions.
3. Replace the cover of the battery compartment.
signal sender battery
remove
reinstall
Battery box cover