Innova IGPCX-27-1, Owner'S Manual

Page: 13 / 76

ENG
11
Using the buttons on the remote control
3
“+” or “-” button
●
Each time the “+” or “-” button is pressed, the set temperature is increased or decreased by 1°C.
If you press and hold the “+” or “-” button, after 2 seconds the set temperature on the remote
control will change quickly. When it reaches your required temperature, release the button. The
temperature indicator on the unit will also change accordingly. (The temperature cannot be
adjusted in auto mode).
●
Under TIMER ON, TIMER OFF or the Clock setting, you can press the “+” or “-” button to adjust
the time. (Refer to TIMER button for details)
4
FAN button
Pressing this button lets you set the fan speed, toggling between: auto (AUTO),
low( ), medium(
), high ( ).
Note:
To avoid blowing cold air when heating mode is started, the fan will start after a delay of
1–5 minutes. (The time is determined by the ambient temperature.) Temperature setting
range on the remote control: 16°C – 30°C. Fan speed setting range: auto, low speed, medi-
um speed and high speed.
Note:
• On AUTO Speed, the IDU fan motor will adjust the fan speed (high, medium or low speed)
according to the ambient temperature.
• The fan speed in drying mode is low.
Auto