Additional Tests
VIEWING THE FIRMWARE VERSION - THE TOOL LIBRARY
3160g 153
If a Trip Cycle Procedure for the
selected Monitor is not available,
an advisory message shows on
the Scan Tool’s display. Use the
UP
and
DOWN
buttons,
as necessary, to highlight
Back
,
then press the
ENTER
button
to return to the Main Menu.
6.
The Trip Cycle Procedure screen
shows the specific set of operating
procedures that ensure the vehicle is
driven in such a way that all the
required “Enabling Criteria” for the
Monitor to run and complete its
diagnostic testing are met. Use the
UP
and
DOWN
buttons, as
necessary, to view the entire screen.
7.
When you are finished viewing the Trip Cycle Procedures, press the
ENTER
button to return to the Trip Cycle Procedures menu, or,
press the
M
button to return to the Main Menu.
VIEWING THE FIRMWARE VERSION
1.
Use the
UP
and
DOWN
buttons, as necessary, to highlight
Firmware Version
in the Main Menu,
then press the
ENTER
button.
The Firmware Version screen dis-
plays.
The screen shows the Scan Tool’s
current firmware version, bootloader
version and database version.
2.
Press the
M
button to return to the Main
Menu.
THE TOOL LIBRARY
The Tool Library contains valuable reference information for the Scan
Tool. The following functions are available:
Tool Icons
– Shows the full names for the
I/M MONITOR STATUS
icons shown and descriptions of informational icons on the Scan
Tool’s display.
DTC Library
– Provides access to libraries of OBD1 and OBD2
DTC definitions.
LED Definitions
– Provides descriptions of the meaning of the Scan
Tool
SYSTEM STATUS
LEDs.