Live Data Mode
RECORDING (CAPTURING) LIVE DATA
132 3160g
4.
Use the
UP
and
DOWN
buttons to scroll through the available
PIDs. When a PID you wish to record is highlighted, press the
ENTER
button to select it (a “checkmark” will show in the checkbox to the
right of the PID to confirm your selection). Repeat the procedure until
only the PIDs you want to record have all been selected.
To deselect a currently selected PID, highlight the PID, then
press the
ENTER
button. The checkmark will be removed
from the checkbox.
To record all PIDs, use the
UP
and
DOWN
buttons, as necessary, to highlight
Record All PIDs
,
the press the
LD
button to continue.
5.
When you are finished making your selections, press the
LD
button
to continue.
If DTCs are presently stored in the
vehicle’s computer, an advisory
message displays. Use the
UP
and
DOWN
buttons, as neces-
sary, to highlight
Erase DTCs
, then
press the
ENTER
button. A
“One moment please…” message
displays while DTCs are erased
from the vehicle’s computer. When
the Erase process is complete, the
Record Live Data screen displays.
If the erase was not successful, an
advisory message shows on the
display.
- To retry the erase process, verify that the Scan Tool is properly
connected to the vehicle’s DLC and that the ignition is on. Use
the
UP
and
DOWN
buttons, as necessary, to highlight
Erase
, then press the
ENTER
button.
- To exit the record function, use
the
UP
and
DOWN
buttons, as necessary, to
highlight
Back
, then press the
ENTER
button to return to the
Record Live Data menu.
The Record Live Data screen displays.
6.
Put the engine in the operating condition that causes the DTC to set.
If necessary, drive the vehicle until
you reach the vehicle speed at
which the problem occurs.
7.
When the Scan Tool detects a fault that
causes a DTC to set, it automatically
records and saves approximately 100
frames of Live Data information in its
memory for each PID selected.