Innotech Omni C14, Installation Instructions Manual

Page: 13 / 90

Page 13
Omni Installation Instructions
© Mass Electronics Pty Ltd 2017 Chapter 1 – Preliminary Information
Table 1-1:
Manual Scope
1-1.2 Scope of this Technical Manual
This technical manual contains:
Chapter Description
Chapter 1 -
Preliminary Information
Contains installation related information of a general nature such as
general safety considerations and pre-installation requirements.
Chapter 2 -
Mechanical Installation
Contains instructions and related data to facilitate the mechanical
installation of components of the Omni System. It also includes
information such as physical descriptions of the units, mounting
dimensions and mechanical installation guidelines.
Chapter 3 -
Electrical Installation
Contains electrical wiring information useful for installation of a basic
“standalone” system. Chapter 3 is augmented by network wiring
information in Chapter 4 - Network Installation. Appropriate references
are provided between Chapter 3 and Chapter 4 for installation of
network wiring.
Chapter 4 -
Network Installation
Provides detailed information for interconnecting various units in a
network configuration. The two electrical installation areas: Chapter 3
and Chapter 4 are purposely separated from each other in the interest
of clarity and to simplify the use of this manual.
Chapter 5 -
Commissioning
Provides instructions for post-installation inspection and checking of
the Omni System, power application and initial setup of the various
units that comprise the system.
References made throughout this manual to "Omni", "Controller" or "BEMS Controller" refer to all models of the
Omni BEMS Controller except where specified.
All references made throughout this manual to controller model numbers (C40, C40D etc) refer to models with and
without displays except where specified.
References made throughout this manual to "U10", "Omni U10" or "Omni REM" refer to the Omni U10 Remote
Expansion Module.