25
Version 1.03 January-2002
7. System Inputs Table
System Inputs are mapped to the following Input Numbers.
ALARM
I/P
No.
Zone
Lamp
DESCRIPTION
AC Fail
101
1
The AC mains has failed, or has been absent for more than the
AC Fail delay time.
Low Battery
102
2
Battery voltage is too low to provide backup power if AC fails.
Cabinet Tamper
103
3
Un-authorised removal of cabinet cover or removal of the
cabinet from it's mounting surface.
Siren Monitor Alarm
104
4
The Siren speaker is disconnected from the Control Panel.
LAN Fuse fail
105
5
LAN fuse has blown. Short circuit or over-current condition.
Battery Fuse fail
106
6
Battery fuse has blown. Short circuit or over-current condition.
Comms Fail
107
7
System failed to report.
System Reset
108
8
The system has been powered down and powered up again
Keypad Lockout
109
9
System has registered 5 incorrect PIN code attempts in a row.
Zone Self Test Fail
110
10
One or more Zone Inputs have failed the Zone Self Test
Keypad Medical Alm
111
11
The Medical Alarm has been activated on a Terminal keypad.
Keypad Panic Alarm
112
12
The Panic Alarm has been activated on a Terminal keypad.
Keypad Duress Alarm 113
13
A Duress PIN code has been entered on a Terminal keypad.
Keypad Fire Alarm
114
14
The Fire Alarm has been activated on a Terminal keypad.
Programming Change
115
16
There has been a programming change in the system database
Door Alarm. Door 1
116
15
"Door Forced" or "Door Held" Condition on Door 1.
Door Alarm. Door 2
117
"Door Forced" or "Door Held" Condition on Door 2.
Door Alarm. Door 3
118
"Door Forced" or "Door Held" Condition on Door 3.
Door Alarm. Door 4
119
"Door Forced" or "Door Held" Condition on Door 4.
Test Report
120
-
A Test report transmission has been sent.
