19
Version 1.03 January-2002
1. Enter the View Software Version number Mode.
To view the current Software Version number on the Terminal, press
,
,
.
The 1st digit of the 4-digit Version number is displayed by the corresponding Zone Lamp flashing.
2. View the Software Version number.
To display each of the remaining digits of the Version number press the
key..
When the last digit is displayed, and the <NEXT> key is pressed, a long beep will sound and the first
digit will again be displayed.
e.g.
If the version number is V 1.0.0.3
<NEXT>, 2, 8. Zone 1 will be flashing
<NEXT>
0 will be flashing
<NEXT>
0 will be flashing
<NEXT>
Zone 3 will be flashing
<NEXT>
Long beep will sound and Zone 1 will be flashing again.
4.9 VIEW THE SOFTWARE VERSION NUMBER.
NEXT 28
The digits are entered in the same manner as described for the Primary Telephone number.
If a mistake is made while keying in the Telephone number digits, press
to clear all the digits
entered and start keying in the number again.
3 beeps will sound to confirm the new Telephone number has been programmed.
If the Telephone number was rejected, one long beep will sound to indicate a problem.
While in the Secondary Telephone number programming Mode, the number can be viewed as
described in Step 3.
5. Program a new Callback Telephone number. (Optional)
Press
and wait for the Terminal to sound a short beep.
The Callback Telephone number is Programmed and Viewed as described for the Primary and
Secondary Telephone numbers.
After the Callback number has been Entered and/or Viewed, pressing
again will return to
Primary Telephone number programming if required.
Otherwise, press
to exit Telephone number programming.
A long beep will sound indicating that there are no more phone numbers to program.
