18
Version 1.03 January-2002
1. Enter the Telephone number programming Mode.
Press
,
,
.
2. Program the new Primary Telephone number.
Press
, then the Telephone number
... (Up to 15 digits), then
The digits are entered according to the following table.
Telephone number digit to program:
0 to 9
#
*
Pause (1 Second)
Key to Press on keypad:
0 to 9
#
*
<NEXT>
Value displayed on Zone Lamps:
0 to 9
10
11
12
e.g.
Telephone number: 1 Pause 1234 5678 is entered by the key sequence:
<*>, 1, <NEXT>, 1, 2, 3, 4, 5, 6, 7, 8, <ENTER>
If a mistake is made while keying in the Telephone number digits, press
to clear all the digits
entered and start keying in the number again.
3 beeps will sound to confirm the new Telephone number has been programmed.
If the Telephone number was rejected, one long beep will sound to indicate a problem.
3. View the Telephone number.
After entering the Telephone number Programming Mode, Press
The first digit of the Telephone number will be displayed on the Terminal Zone Lamps.
Press the
key to step through all the digits in the Time and Date Data.
e.g. Using the Telephone number example “1 Pause 1234 5678”, the following data will be
displayed:
<ENTER>
1 will be displayed.
<NEXT>
12 will be displayed.
<NEXT>
1 will be displayed.
<NEXT>
2 will be displayed.
etc.
When the end of the Telephone number is reached, 3 short beeps will sound to indicate there are no
more digits to display, and the first digit (1 in this example) will again be displayed.
4. Program a new Secondary Telephone number. (Optional)
Press
and wait for the Terminal to sound a short beep.
Press
, then the Telephone number
... (Up to 15 digits), then
4.8 PROGRAM THE TELEPHONE NUMBERS.
NEXT 27
