Inner Range CONCEPT IQ User Manual Download Page 11

Page: 11 / 28

Version 1.03 January-2002

Master User Operations

4.0 ACCESSING THE OPERATIONAL MODES.

The Default Master Code is 0123. (Or 012345 is system is configured for 6 Digit PIN codes)
This Code should be changed as soon as possible after installation.
When choosing a new Master Code, ensure that a PIN code is chosen that will not be forgotten,
while still providing security against unauthorised access.

Master User Operations require the User to Access a number of different Operational Modes.
This is done by entering a valid Master PIN code, then pressing the <NEXT> key before selecting
the 2-digit Mode number. e.g.
Enter PIN;

... , then

, then the Mode number;

This key sequence must be used to access all Operational Modes described in this section.
The descriptions of each operation will only show the key sequence <NEXT>, n, n. when showing
how to access the Operational mode required. Remember that this is preceded by the PIN code.

Master Operations Mode Indication.

The <FAULT> and <PWR> Lamps will flash together to indicate that the system is in Master User
Operational Modes.

Exiting the Master User Operations.

Press

to exit any of the Master Operations.

4.1

Adding / Changing / Deleting Users. ...................................................................... NEXT 20

4.2

View history. .............................................................................................................. NEXT 21

4.3

Walk test mode. ........................................................................................................ NEXT 22

4.4

Setting the Real-Time Clock. .................................................................................. NEXT 23

4.5

Auxiliary Control and Test mode. ............................................................................ NEXT 24

4.6

Fault Analysis mode. ............................................................................................... NEXT 25

4.7

Zone Self Test display. ............................................................................................. NEXT 26

4.8

Edit Telephone numbers. ......................................................................................... NEXT 27

4.9

View Sofware Version number. ............................................................................... NEXT 28

4.10

Acknowledge Door Alarms. ..................................................................................... NEXT 29

4.11

De-Isolate System Inputs. ....................................................................................... NEXT 90

4.12

Test Siren speaker and Strobe (Aux. 1). ............................................................... NEXT 91

4.13

Battery Test. .............................................................................................................. NEXT 92

4.14

Test Transmission. (Test report) ............................................................................ NEXT 93

4.15

Day Alarm on / off..................................................................................................... NEXT 94

4.16

Reset Latching Auxiliaries. ...................................................................................... NEXT 96

4.17

Answer Phone .......................................................................................................... NEXT 97

4.18

Reset Smoke Detectors. .......................................................................................... NEXT 99

Summary of Contents for CONCEPT IQ





























Search results

Summary of Contents for CONCEPT IQ

Reviews:

Related manuals for CONCEPT IQ

Brands by name

Popular brands

Inner Range CONCEPT IQ, User Manual

Search results

Summary of Contents for CONCEPT IQ

Reviews:

Related manuals for CONCEPT IQ

Brands by name

Popular brands