Inglesina otutto, User Manual

Page: 30 / 64

30
EN
RELEASING THE SEAT UNIT FROM THE FRAME
fig. 33
Press both handles ( R3 TJNVMUBOFPVTMZBOEMJGUVQUIF
seat unit from the frame.
WARNING: never fit/release the seat unit from the frame
with the baby inside.
BACKREST ADJUSTMENT
fig. 34
*UJTQPTTJCMFUPBEKVTUUIFCBDLSFTUUPNBOZQPTJUJPOT
push the lever ( R4 ) to lower the backrest.
FOOTREST ADJUSTMENT
fig. 35
Operate levers ( R5 ) to adjust the footrest height.
SAFETY BELTS
fig. 36
7FSJGZUIBUUIFTBGFUZCFMUTBSFJOTFSUFEJOUIFFZFMFUT
BUUIFIFJHIUPGUIFTIPVMEFSTPSJNNFEJBUFMZBCPWF*GUIF
position is not correct, extract the belts from the first pair of
FZFMFUTBOESFJOTFSUUIFNJOUIFTFDPOEPOFBMXBZTVTFFZF
-
lets at the same height.
fig. 37 .BLFTVSFUIBUUIFCBDLTUSBQJTQSPQFSMZJOTFSUFEJO
the ends of the waist one.
fig. 38 Fasten the ends of the waist belt to the central buckle.
fig. 39 5IF XBJTU TUSBQ NVTU BMXBZT QBTT UISPVHI UIF TJEF
rings ( R6 ) and, when being used, it must be adjusted in order
UPQSPQFSMZTFDVSFUIFCBCZ
fig. 40 "MXBZT VTF UIF DSPUDI TUSBQ UPHFUIFS XJUI UIF XBJTU
POFBEKVTUJOHCPUIPGUIFNQSPQFSMZ
CAUTION! The inobservance of this precaution may result
in the falling or sliding out of the baby with a resulting
risk of injury.
BUMPER BAR ADJUSTMENT
fig. 41
Press the buttons ( R7 ) and adjust the bumper bar to
the desired position until hearing a CLICK, which confirms its
correct hooking.
FITTING THE HOOD
fig. 42
Insert the flaps ( R8 ) in the proper openings and fasten
all press studs to the backrest.
REMOVING THE LINING
*U JT SFDPNNFOEFE UP SFNPWF UIF DPWFSJOH QFSJPEJDBMMZ UP
provide for its correct maintenance.
fig. 43 Extract the footrest from the supports ( R9 ) and un-
hook all buttons ( R10 ) of the covering.
fig. 44 Extract the waist strap from the side rings ( R6 QBZJOH
attention to let the first teeth of the buckle pass through the
TJEFSJOHCFGPSFFYUSBDUJOHJUDPNQMFUFMZ
fig. 45 Pass the back straps and the crotch strap through the
TVJUBCMFFZFMFUTPOUIFMJOJOHBOEFYUSBDUJUDPNQMFUFMZ
CAUTION! Make sure that the lining has been properly
reassembled before use.
HUGGY
FITTING THE HUGGY SEAT TO THE FRAME
fig. 46
The HUGGY seat fits the frame thanks to the EASY
$-*1 QBUFOUFE TZTUFN QPTJUJPO UIF TFBU PO UIF GSBNF VOUJM
hearing a CLICK, which confirms its correct hooking.
CAUTION: make sure that the seat unit is always firmly
engaged before use.
RELEASING THE SEAT FROM THE FRAME
fig. 47
Press lever ( S1 ).
fig. 48 Lift up the seat from the frame.
SEAT FACING THE MUM OR THE STREET
fig. 49
*UJTQPTTJCMFUPöUUIF)VHHZTFBUUPUIFGSBNFGBDJOH
the mum or the street.
INSTRUCTIONS